| 法国: | |
| NF A04-305-1983 | 钢铁 厚度不小于6mm钢板超声反射法检测 质量定义 测试方法 IRON AND STEEL. ULTRASONIC REFLECTION TESTING OF SHEET WITH THICKNESS NOT LESS THAN 6 MM. DEFINITION OF QUALITY. TEST METHODS. |
| NF A04-306-2002 | 钢铁 带平行法兰和IPE梁的H梁的超声检测 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams. |
| NF A04-307-2002 | 无损检测 钢棒的超声检测Non destructive testing - Ultrasonic testing of steel bars. |
| NF A04-311-64 | 钢件超声检测用标准试块 |
| NF A04-312-2002 | 无损检测 厚度等于或大于6mm的奥氏体和奥氏体铁素体不锈钢板制品的超声检测(反射法)Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method). |
| NF A04-315-3-1998 | 钢锻件的无损检测 第3部分:铁素体或马氏体钢锻件的超声检测 Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings. |
| NF A04-315-4-1999 | 钢锻件的无损检测 第4部分:奥氏体和奥氏体铁素体不锈钢锻件的超声检测 Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings. |
| NF A09-020-4-2000 | 无损检测术语 第4部分:超声检测 Non destructive testing - Terminology - Part 4 : terms used in ultrasonic testing. |
| NF A09-300-87 | 无损检测超声检验名词术语 |
| NF A09-310-87 | 无损检测超声检验用A型及B型校准试块 |
| NF A09-311-2000 | 无损检测 超声检验 1号校验试块规范 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1. |
| NF A09-315-87 | A型和B型校准试块的使用方法 |
| NF A09-320-84 | 金属制品手动超声检测用超声探伤仪特性的校准方法 |
| NF A09-320-1-2000 | 无损检测 超声检验设备的特性和验证 第1部分:仪器 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1 : instruments. |
| NF A09-320-2-2001 | 无损检测 超声检验设备的特性和验证 第2部分:探头 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes. |
| NF A09-320-3-2000 | 无损检测 超声检验设备的特性和验证 第3部分:组合设备 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3 : combined equipment. |
| NF A09-321-1988 | 无损检测 超声检测 超声仪器的选用方法 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus. |
| NF A09-322-85 | 工业用超声探头规格 |
| NF A09-323-87 | 工业用超声探头特性表示方法 |
| NF A09-325-87 | 超声检验中声波束的一般规则 |
| NF A09-326-87 | 接触式探头超声波束特性的现场测定方法 |
| NF A09-330-86 | 聚焦超声波束特性的定义及其校准方法 |
| NF A09-331-86 | 使用聚焦超声波束测定缺陷大小的方法 |
| NF A09-340-2-2001 | 无损检测 超声检验 第2部分:灵敏度和范围设定 Non-destructive testing - Ultrasonic examination - Part 2 : sensitivity and range setting. |
| NF A09-340-4-2002 | 无损检测 超声检验 第4部分:垂直于表面的不连续性的检验 Non-destructive testing - Ultrasonic examination - Part 4 : examination for discontinuities perpendicular to the surface. |
| NF A09-340-5-2001 | 无损检测 超声检验 第5部分:不连续性的特性和尺寸 Non-destructive testing - Ultrasonic examination - Part 5 : characterization and sizing of discontinuities. |
| NF A09-350-84 | 无损检测 声发射词汇NON DESTRUCTIVE TESTING. VOCABULARY USED IN ACOUSTIC EMISSION. |
| NF A09-351-1984 | 无损检测 声发射源定位的推荐方法 NON DESTRUCTIVE TESTING. RECOMMANDED PRACTICES FOR THE LOCALIZING OF ACOUSTIC EMISSION SOURCES. |
| NF A09-352-85 | 声发射检验的推荐方法 |
| NF A09-353-85 | 声发射波单通道特性的测量 |
| NF A09-353-1-2001 | 无损检测 声发射 设备特性 第1部分:设备描述 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1 : equipment desc |
| NF A09-353-2-2001 | 无损检测 声发射 设备特性 第2部分:操作特性验证 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2 : verification of operating characteristic. |
| NF A09-354-85 | 商品化声发射压电传感器及其技术数据的意义 |
| NF A09-355-1985 | 无损检测 声发射 压电传感器的耦合 NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. COUPLING OF PIEZOELECTRIC SENSORS. |
| NF A09-360-1985 | 无损检测 声发射 光纤复合材料零件与构件的检验 NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. EXAMINATION OF COMPOSITE MATERIAL PARTS AND STRUCTURES. MATRIX FIBERS. |
| NF A09-390-2002 | 无损检测 声发射 一般原理Non-destructive testing - Acoustic emission - General principles. |
| NF A49-200-77 | 钢管,锅炉及压力容器用无缝钢管超声检测方法分类及应用 |
| NF A49-870-81 | 钢管,锅炉及压力容器用无缝钢管纵向缺陷的超声检测方法 |
| NF A49-875-6-2000 | 钢管无损检测 第6部分:探测无缝钢管横向不完整性的自动全圆周超声检测 Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections. |
| NF A49-875-7-1996 | 钢管无损检测 第7部分:探测无缝钢管和焊接(埋弧焊除外)钢管纵向不完整性的自动全圆周超声检测Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections. |
| NF A49-875-8-2000 | 钢管无损检测 第8部分:探测电焊钢管焊缝纵向不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 8 : automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections. |
| NF A49-875-9-2000 | 钢管无损检测 第9部分:探测埋弧焊钢管焊缝纵、横向不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 9 : automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections. |
| NF A49-875-13-2000 | 钢管无损检测 第13部分:无缝和焊接(埋弧焊除外)钢管的自动全圆周超声测厚 Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes. |
| NF A49-875-14-2000 | 钢管无损检测 第14部分:探测无缝和焊接(除埋弧焊外)钢管层状不完整性的自动超声检测 Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections. |
| NF A49-875-15-2000 | 钢管无损检测 第15部分:探测焊接钢管用带/板材层状不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections. |
| NF A49-875-16-2000 | 钢管无损检测 第16部分:探测用焊接钢管焊缝邻近区域层状不完整性的自动超声检测Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections. |
| NF A49-875-17-2000 | 钢管无损检测 第17部分:探测无缝和焊接钢管管端层状不完整性的超声检测Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections. |
| NF A89-520-1997 | 焊缝无损检验 焊接接头的超声检验 Non destructive examination of welds. Ultrasonic examination of welded joints. |
| NF A89-521-1997 | 焊缝无损检验 焊接接头的超声检验 验收等级 Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels. |
| NF A89-522-1998 | 焊缝无损检验 超声检验 焊缝的迹象特征 Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds. |
| NF A89-611-1992 | 钢焊缝 焊缝超声检验用2号校验试块 Welds in steel. Calibration block number 2 for ultrasonic examination of welds. |
| NF C01-801-1999 | 电工词汇 第801章:声学和电声学 Electrotechnical Vocabulary. Chapter 801 : acoustics and electroacoustics. |
| NF S30-101-1973 | 声学术语 一般定义ACOUSTICS. TERMINOLOGY. GENERAL DEFINITIONS. |
| NF S30-102-1973 | 声学术语 声与振动的传输系统和换能器 ACOUSTICS. TERMINOLOGY. TRANSMISSION SYSTEMS AND TRANSDUCERS FOR SOUND AND VIBRATIONS. |
| NF S30-103-1973 | 声学术语 仪器ACOUSTICS. TERMINOLOGY. INSTRUMENTS. |
| NF S30-104-1974 | 声学术语 记录和重现ACOUSTICS. TERMINOLOGY. RECORDING AND REPRODUCTION. |
| NF S31-029-1973 | 声学 声冲击物理性能的注释和测量 ACOUSTICS. DEsc |
| NF S31-065-1981 | 声学 建筑声学测试 管中声吸收系数与声阻抗的测定 ACOUSTICS. TESTING OF ARCHITECTURAL ACOUSTICS. DETERMINATION OF SOUND ABSORPTION COEFFICIENT AND IMPEDANCE IN A TUBE. |
