|
英国: |
|
BS 1113/8:1999 |
用于水管蒸汽电站设计与制造的规范 第8部分：超声验收准则 |
|
BS 1881/203:1986 |
混凝土试验 第203部分：混凝土中超声脉冲速度的推荐测量方法 |
|
BS 2704-83 |
超声检测用校准试块的技术要求 |
|
BS 2923 第1部分 |
焊接声发射检测 第1部分：铁素体钢熔焊手工检测方法 |
|
BS 2923 第2部分 |
焊接超声检测方法 第2部分：铁素体钢熔焊的对接焊缝自动检测 |
|
BS 3605-73 附录B |
管材纵向缺陷的超声检测 |
|
BS 3683/4:1985 |
无损检测术语汇编 第4部分：超声波检验 |
|
BS 3889/1-1990 |
管材无损检测方法-第1部分：锻钢管缺陷的自动超声探伤 |
|
BS 3923/1:1986 |
焊缝超声波检验方法-铁素体钢熔焊缝手工超声检测 (WSTS,90-4～91-1)
已被BS EN1714:1998取代 |
|
BS 3923/2:1972 |
焊缝超声检验方法 第2部分:铁素体钢熔焊对接焊缝自动检测
Methods for ultrasonic examination of welds - Automatic examination of fusion welded butt joints in ferritic steels |
|
BS 3923/3:1972 |
焊缝超声波检验方法-接管角焊缝手工超声检测 |
|
BS 4124-87 |
锻钢件的超声波检验方法 |
|
BS 4331/1:78(1989) |
超声检测设备工作特性测定方法 第1部分 已被BS EN12668-3:2000取代 |
|
BS 4331/2:72(1982) |
超声检测设备性能特征评定办法 第2部分：电性能 |
|
BS 4331/3:74(1987) |
超声检测设备性能特征评定办法 第3部分：探头（不包括浸入式探头）在用监测指南 |
|
BS 4408Pt5-74 |
混凝土中超声脉冲速度的测量 |
|
BS 5813-1979 |
脉冲发生器性能表示指南 Guide for expression of the performance of pulse generators |
|
BS 5996-80 |
铁素体钢板超声检测及质量等级分类 |
|
BS 6208-1990 |
铁素体钢铸件超声检测方法和质量等级方法 |
|
BS 7585/1:1992 |
多层金属普通滑动轴承 结合层的超声无损检测方法 |
|
BS 7706-1993 |
用于缺陷探测、定位和定量的超声时间渡越衍射（TOFD）法的校验和调整指南
Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws |
|
BS 7887-1997 |
超声学 实时脉冲回波系统 测定性能规范的试验程序指南
Ultrasonics - Real-time pulse-echo systems - Guide for test procedures to determine performance specifications |
|
BS DD21-72 |
对12～150mm厚钢板超声检测的质量分级 |
|
BS EN 583-1-1999 |
无损检测 超声检测 一般原理 Non-destructive testing - Ultrasonic examination - General principles |
|
BS EN 583-2-2001 |
无损检测 超声检测 灵敏度和范围设定
Non-destructive testing - Ultrasonic examination - Sensitivity and range setting |
|
BS EN 583-3-1997 |
无损检测 超声检测 传输法 Non-destructive testing - Ultrasonic examination - Transmission technique |
|
BS EN 583-4-2002 |
无损检测 超声检验 垂直于表面的不连续性的检验
Non-destructive testing - Ultrasonic examination - Examination for discontinuities perpendicular to the surface |
|
BS EN 583-5-2001 |
无损检测 超声检测 不连续性的特性与尺寸
Non-destructive testing - Ultrasonic examination - Characterization and sizing of discontinuities |
|
BS EN 1330-4-2000 |
无损检测术语 超声检测 Non-destructive testing - Terminology - Terms used in ultrasonic testing |
|
BS EN 1330-9-2000 |
无损检测术语 声发射检测 Non-destructive testing - Terminology - Terms used in acoustic emission testing |
|
BS EN 1712-1997 |
焊缝无损检验 焊缝的超声检验 验收等级
Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels |
|
BS EN 1713-1998 |
焊缝无损检验 超声检验 焊缝的迹象表征
Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds |
|
BS EN 1714-1998 |
焊缝无损检验 焊缝超声检验
Non destructive examination of welded joints - Ultrasonic examination of welded joints |
|
BS EN 10160-1999 |
厚度等于大于6mm钢板产品的超声检测（反射法），BS 5996 |
|
BS EN 10228-3-1998 |
钢锻件无损检测 铁素体或马氏体钢锻件的超声检测
Non-destructive testing of steel forgings - Ultrasonic testing of ferritic or martensitic steel forgings |
|
BS EN 10228-4-1999 |
锻钢件无损检测-奥氏体与奥氏体-铁素体钢锻件的超声检测 |
|
BS EN 10246-6-2000 |
钢管无损检测 探测无缝钢管横向不完整性的自动全圆周超声检测
Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
|
BS EN 10246-7-1996 |
钢管无损检测 探测无缝与焊接（埋弧焊除外）钢管纵向不完整性的自动全圆周超声检测
Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
|
BS EN 10246-8-2000 |
钢管无损检测 探测电焊钢管焊缝纵向不完整性的的自动超声检测
Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
|
BS EN 10246-9-2000 |
钢管无损检测 探测埋弧焊钢管焊缝纵、横向不完整性的自动超声检测
Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
|
BS EN 10246-13-2000 |
钢管无损检测 无缝和焊接钢管(埋弧焊除外)的自动全圆周超声测厚
Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
|
BS EN 10246-14-2000 |
钢管无损检测 探测无缝与焊接（埋弧焊除外）钢管层状不完整性的自动超声检测
Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
|
BS EN 10246-15-2000 |
钢管无损检测 探测焊接钢管用带/板材层状不完整性的自动超声检测
Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
|
BS EN 10246-16-2000 |
钢管无损检测 探测焊接钢管焊缝邻近区域层状不完整性的自动超声检测
Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
|
BS EN 10246-17-2000 |
钢管无损检测 探测无缝和焊接钢管管端层状不完整性的超声波检测
Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
|
BS EN 10307-2002 |
无损检测 厚度大于或等于6mm的奥氏体铁素体不锈钢制品的超声检测(反射法)
Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
|
BS EN 10308-2002 |
无损检测 钢棒的超声检测 Non-destructive testing - Ultrasonic testing of steel bars |
|
BS EN 12223-2000 |
无损检测 超声检验 1号校验试块规范
Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1 |
|
BS EN 12668-1-2000 |
无损检测 超声检测设备特性与确认 仪器
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments |
|
BS EN 12668-2-2001 |
无损检测 超声检测设备特性与确认 探头
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes |
|
BS EN 12668-3-2000 |
无损检测 超声检测设备特性与确认 组合设备
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Combined equipment |
|
BS EN 12680-2-2003 |
铸造 超声检验 高应力元件用钢铸件
Founding - Ultrasonic examination - Steel castings for highly stressed components |
|
BS EN 12680-3-2003 |
铸造 超声检验 球墨铸铁铸件
Founding - Ultrasonic examination - Spheroidal graphite cast iron castings |
|
BS EN 13477-1-2001 |
无损检测 声发射 设备特性 设备描述
Non-destructive testing - Acoustic emission - Equipment characterization - Equipment description |
|
BS EN 13477-2-2001 |
无损检测 声发射 设备特性 操作特性的验证
Non-destructive testing - Acoustic emission - Equipment characterization - Verification of operating characteristic |
|
BS EN 27963-1992 |
焊缝超声检验用2号校验试块规范 ISO 7963-1985
Specification for calibration block No. 2 for ultrasonic examination of welds |
|
BS EN 13554-2002 |
无损检测 声发射 一般原理 Non-destructive testing - Acoustic emission - General principles |
|
BS M36-84 |
特殊锻件用平底孔标准的水浸法超声检测 |
|
BS 4S100 附录B |
轧制钢坯和棒材的超声检测 |
|
|
|
