英国: | |
BS 499 Pt.3-1965 | 射线照相检测显示焊缝缺陷的相关术语和缩略语 |
BS 1384/1:1985 | 底片光学密度测量 术语、符号和标志指南 |
BS 1384/2:1993 | 底片光学密度测量 关于透射光学密度几何条件的规范 |
BS 1881/205:1986 |
混凝土试验 第205部分:混凝土的射线照相检测推荐方法 Testing concrete - Recommendations for radiography of concrete |
BS 2600-1973 | 钢板(2-50mm,50-200mm)对接焊缝射线检测方法(INDT,84-4) |
BS 2737:56(1995) | 射线照相检测显示铸件内部缺陷的相关术语 |
BS 2910-1986 | 钢管对接环焊缝的射线检测方法(WSTS,89-3,4;NDT,88-11) |
BS 3385-1973 | 小型直读式辐射剂量计 |
BS 3490-1985 | 工业射线照相胶片的尺寸,包装及标记 |
BS 3664-1963 | 个人辐射监控用胶片剂量计规范 Specification for film badges for personnel radiation monitoring |
BS 3683/3:1984 | 无损检测术语汇编 射线探伤(被BS EN 1330-3:1997取代) |
BS 3686 Pt.3-1984 | 无损检测名词术语--射线检验 |
BS 3783-1964 |
个人防护X射线用铅橡胶围裙规范 Specification for X-ray lead-rubber protective aprons for personal use |
BS 3890-1965 | 辐射剂量监测胶片的测试,校准和冲洗的一般推荐方法 |
BS 3895-1976 |
放射性材料安全运输包装的设计、检验及使用指南 Guide to the design, testing and use of packaging for the safe transport of radioactive materials |
BS 3909-1965 | 屏蔽辐射用铅锭规范 Specification for ingot lead for radiation shielding |
BS 3971-1985 | 射线照相用象质计及其推荐使用方法(NDT,87-1) |
BS 4031-1966 | X 射线防护用铅玻璃规范 Specification for X-ray protective lead glasses |
BS 4094-1-1966 | 电离辐射屏蔽的推荐数据:γ射线的屏蔽 |
BS 4094-2-1971 | 电离辐射屏蔽的推荐数据:χ射线的屏蔽 |
BS 4097-1966 | 工业用γ射线曝光容器及射线源容器 |
BS 4304-1968 | χ光胶片盒(扁平硬质) |
BS 4408 Pt.3-1970 | 混凝土的γ射线照相检测 |
BS 4513-1969 | 辐射屏蔽用铅砖规范 Specification for lead bricks for radiation shielding |
BS 5288-1976 | 密封放射性源 |
BS 5230-1975 | 工业射线检验胶片的感光度和对比度测定方法 |
BS 5411 Pt.8-1976 | 金属及有关复合层的检测方法--χ射线光谱法(ISO 3497) |
BS 5411 Pt.12-1976 | 金属及有关复合层的检测方法--复合层厚度测量的β射线背散射法(ISO 3543) |
BS 5500-1978 | 非受火熔焊压力容器 |
BS 5650-1978 | γ射线照相装置规范 ISO 3999-1977 Specification for apparatus for gamma radiography |
BS 6090-1981 | 个人用照相剂量计规格 |
BS 6932-1988 | 工业射线照相小焦点和微焦点X 射线管有效焦点尺寸的测量方法 (WSTS 1995.6) |
BS 7009-1988 | 焊缝实时射线成像检验应用指南 Guide to application of real-time radiography to weld inspection |
BS 7731:94(1998) | 铸造金属外科植入物的射线照相检验方法 |
BS 7518-1995 | 辐射防护仪器 环境监测用测量X或γ射线的便携式、可移动或者固定安装的设备 整体组装 Radiation protection instrumentation - Portable, transportable or installed equipment to measure x or gamma radiation for environmental monitoring - Integrating assemblies |
BS CECC 00012-1985 | 电子元件质量保证协调系统--基本标准--电子元件的射线检验 |
BS DD ISO/TS 13762-2002 | 粒径分析 小角度X射线散射法 Particle size analysis - Small angle X- ray scattering method |
BS EN 444-1994 |
无损检测 金属材料x和γ射线照相检验的一般原理 Non-destructive testing - General principles for radiographic examination of me |
BS EN 462-1-1994 |
无损检测 射线照片图像质量 像质计(线型) 图像质量值的确定 Non-destructive testing - Image quality of radiographs - Image quality indicators (wire type) - Determination of image quality value |
BS EN 462-2-1994 |
无损检测 射线照片图像质量 像质计(台阶/孔型) 图像质量值的确定 Non-destructive testing - Image quality of radiographs - Image quality indicators (step/hole type) - Determination of image quality value |
BS EN 462-3-1997 |
无损检测 射线照片图像质量 黑色金属图像质量分级 Non- destructive testing - Image quality of radiographs - Image quality classes for ferrous me |
BS EN 462-4-1995 |
无损检测 射线照片图像质量 图像质量值和图像质量表的实验评定 Non- destructive testing - Image quality of radiographs - Experimental evaluation of image quality values and image quality tables |
BS EN 462-5-1996 |
无损检测 射线照片图像质量 像质计(双线型) 图像不清晰度的确定 Non-destructive testing - Image quality of radiographs - Image quality indicators (duplex wire type), determination of image unsharpness value |
BS EN 584-1-1995 |
无损检测 工业射线照相胶片 工业胶片分级 Non-destructive testing - Industrial radiographic film - Classification of film systems for industrial radiography |
BS EN 584-2-1997 |
无损检测 工业射线照相胶片 利用参考值的胶片处理控制 Non-destructive testing - Industrial radiographic film - Control of film processing by means of reference values |
BS EN 1330-3-1997 |
无损检测 术语 工业射线照相检测 Non-destructive testing - Terminology - Terms used in industrial radiographic testing |
BS EN 1435-1997 |
焊缝的无损检验 焊缝的射线照相检验 Non-destructive examination of welds - Radiographic examination of welded joints |
BS EN 10246-10-2000 |
钢管的无损检测 探测奥氏体熔弧焊钢管焊缝不完整性的射线照相检测 Non- destructive testing of steel tubes - Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
BS EN 12543-1-1999 |
无损检测 工业X射线系统的焦点特性-扫描法 Non- destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non- destructive testing - Scanning method |
BS EN 12543-2-1999 |
无损检测 工业X射线系统的焦点特性-针孔照相法 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Pinhole camera radiographic method |
BS EN 12543-3-1999 |
无损检测 工业X射线系统的焦点特性-缝隙照相法 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Slit camera radiographic method |
BS EN 12543-4-1999 |
无损检测 工业X射线系统的焦点特性-边缘法 Non- destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non- destructive testing - Edge method |
BS EN 12543-5-1999 |
无损检测 工业X射线系统的焦点特性-小焦点与微焦点X射线管有效焦点尺寸的测量 Non-destructive testing - Characteristics of focal spots in industrial X -ray systems for use in non-destructive testing - Measurement of the effective focal spot size of mini and micro focus X-ray tubes |
BS EN 12544-1-1999 |
无损检测 X射线管电压测量与评价-分压法 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Voltage divider method |
BS EN 12544-2-2000 |
无损检测 X射线管电压测量与评价-利用厚滤波板法的恒定检验 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Constancy check by the thick filter method |
BS EN 12544-3-1999 |
无损检测 X射线管电压测量与评价-光谱法 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Spectrometric method |
BS EN 12679-2000 |
无损检测 工业射线照相源的尺寸确定-射线照相法 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method |
BS EN 12681-2003 | 锻造 射线照相检验 Founding - Radiographic examination |
BS EN 13068-1-2000 |
无损检测 射线检测 图像特性的定量测量 Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties |
BS EN 13068-2-2000 |
无损检测 射线检测 成像装置长期稳定性的检验 Non-destructive testing - Radioscopic testing - Check of long term stability of imaging devices |
BS EN 13068-3-2001 |
无损检测 射线照相检测 金属材料X与γ射线照相检测的一般原理 Non- destructive testing - Radioscopic testing - General principles of radioscopic testing of me |
BS EN 13925-1-2003 |
无损检测 多晶和非晶材料的X射线衍射 一般原理 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles |
BS EN 13925-2-2003 |
无损检测 多晶和非晶材料的X射线衍射 程序 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Procedures |
BS EN 24503-1993 |
硬质合金 用X射线荧光分析法对金属元素含量的测定 熔化法 Hardme |
BS EN 25580-1992 |
无损检测用工业射线照相观片灯最低要求规范 Specification for minimum requirements for industrial radiographic illuminators for non-destructive testing |
BS EN 60522-1999 | X射线管装置固定滤波的测定 Determination of the permanent filtration of X-ray tube assemblies |
BS EN 60580-2000 | 区域辐射剂量计 Dose area product meters |
BS EN 60789-1992 | 安格型γ射线机的试验方法 Methods of test for Anger type gamma cameras |
BS EN 61262-5-1995 |
医用电子装置光电X射线图象增强器的特性 探测量子效率的测定 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the detective quantum efficiency |
BS EN 61675-1-1998 |
放射性核成像装置 性能和试验条件 正电子放射层析摄影 Radionuclide imaging devices - Characteristics and test conditions - Positron emission tomographs |
BS EN 61675-2-1998 |
放射性核成像装置 性能和试验条件 单光子发射计算机层析摄影 Radionuclide imaging devices - Characteristics and test conditions - Single photon emission computer tomographs |
BS EN 61675-3-1998 |
放射性核成像装置 性能和试验条件 γ射线机为基础的全景成像系统 Radionuclide imaging devices - Characteristics and test conditions - Gamma camera ba |
BS EN 100012-1996 | 电子元件质量评估协调系统-基本规范-电子元件的X射线检验 |
BS ISO 4037-2-1998 |
校准剂量计和剂量率计并测定其对光子能量功能响应的X和γ参照辐射 能量范围在8KeV以上到1、3和4MeV至9MeV辐射防护的放射剂量 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Dosimetry for radiation protection over the energy ranges 8 keV to 1, 3 MeV and 4 MeV to 9 MeV |
BS ISO 4037-3-1999 |
校准剂量计和剂量率计并测定其对光子能量功能响应的X和γ参照辐射 第3部分:区域和个人剂量计校验及其对能量和入射角的功能响应测定 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence |
BS ISO 5655-2001 |
照相技术 工业射线照相胶片(卷片与单片)和金属增感屏-尺寸 Photography - Industrial radiographic films (roll and sheet) and me |
BS ISO 7004-1987 | 照相技术 工业射线照相胶片-X与γ射线曝光的ISO速度与平均梯度的确定 |
BS ISO 8529-1-2001 |
参照中子辐射 第1部分:特性和生产方法 Reference neutron radiations Characteristics and methods of production |
BS ISO 8529-3-1999 | 参照中子辐射 第3部分:区域及个人剂量计的校正及其对中子能量和入射角的功能响应测 定 Reference neutron radiations - Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence |
BS ISO 11929-4-2001 |
致电离辐射测量的检测范围和判定极限的测定 在没有样品处理影响时利用模拟记数率计线性刻度测量的基本原理和应用 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment |
BS ISO 12645-2000 |
图像技术 过程控制 鉴定透射密度计不透明区的参照材料 Graphic technology - Process control - Certified reference material for opaque area calibration of transmission densitometers |
BS ISO 12794-2000 |
核能 辐射防护 四肢和眼用个人热致发光剂量计 Nuclear energy - Radiation protection - Individual thermoluminescence dosemeters for extremities and eyes |
BS ISO 14152-2002 |
中子辐射防护屏蔽 选择适用材料的设计原理和考虑 Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials |
BS ISO 14807-2001 |
照相术 透射和反射密度计 性能测定方法 Photography - Transmission and reflection densitometers - Method for determining performance |
BS ISO 14535-2001 |
照相术 室内光下包装电子扫描仪及成像胶片和胶卷 尺寸和有关要求 Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements |
BS ISO 15567-1999 |
X射线(韧性辐射)辐射处理的剂量测定 Practice for dosimetry in an X- ray (bremsstrahlung) facility for radiation processing |
BS ISO 18904-2000 |
成像材料 已处理胶片 测定润滑性的方法 Imaging materials - Processed films - Method for determining lubrication |
BS ISO 18906-2001 |
成像材料 照相胶片 安全胶片规范 Imaging materials - Photographic films - Specifications for safety film |
BS ISO 18920-2000 |
成像材料 已处理照片的反射打印 存储方法 Imaging materials - Processed photographic reflection prints - Storage practices |
BS IEC 60532-2001 | 辐射防护仪器 安装的剂量比率计 报警组件和监测仪 能量50KeV~7MeV的X和γ射线辐射 Radiation protection instrumentation - Installed dose ratemeters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV |
BS IEC 60692-2000 |
核仪器 利用电离辐射的密度计 定义和试验方法 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods |
BS IEC 61336-1998 |
核仪器 利用电离辐射的厚度测量系统 定义和试验方法 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods |
BS IEC 61526-2000 |
辐射防护仪器 x、γ和β射线个人剂量当量Hp(10)和Hp(0.07)的测量 直读式个人剂量当量和/或剂量当量比率剂量计 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations - Direct reading personal dose equivalent and/or dose equivalent rate dosemeters |
BS IEC 61584-2001 |
辐射防护仪器 安装,便携或运输组件 空气比释动能指示和空气比释动能率的测量 Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate |
BS EN ISO 3543-2001 | 金属与非金属涂层-厚度测量-β背散射法 |
KT 17-1999 | 无损检测(射线照相法) Non destructive testing (radiography) |
KIT 17-1999 | 无损检测(射线照相法) 包装 Non destructive testing (radiography) pack |
BS M34-1998 |
(英国航空标准) 射线照相技术的准备和使用方法 Method of preparation and use of radiographic techniques |
FD A09-203-1999 |
无损检测 混凝土、钢筋混凝土、预应力混凝土材料的X射线和γ射线照相检验 带说明的射线照片举例 Non destructive testing - Radiographic examination of concrete, reinforced concrete, prestressed concrete materials by X- and gamma rays - Examples of radiographs with their interpretation. |
Copyright C 20092014 All Rights Reserved 版权所有 河南旻宸企业管理咨询有限公司 豫ICP备2024047879号-1
地址:河南省新乡市高新技术开发区20号街坊开祥天下城11号楼 EMAIL:154740484@qq.com
Powered by 无损检测资源网